View 10-R0126PA015SC-M628F40_8477089.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 flow90pack 0 1200v/15a clip-in pcb mounting (optional) open emitter for easy current sensing standard drive servo drive bookshelf inverter 10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 t j =25c, unless otherwise specified parameter symbol value unit inverter transistor t h =80c 23 t c =80 c 25 t h =80 c 69 t c =80 c 104 t sc t j 150 c 10 s v cc v g e =15v 800 v * m easured with phase-change material inverter diode t h =80c 23 t c =80 c 30 t h =80 c 53 t c =80 c 81 * me asured with phase-change material 90 pcb mounting for easy heat sink assembly t j max p tot i cpulse t j max v ce i c v 1200 c 1 75 a w v ge 30 w 175 t j =t j ma x t j =t j max vce 1 200v, tj top max a 1200 a v t p limited by t j max coll e ctor-emitter break down voltage dc collector current * pulsed collector current maximum junction temperature peak repetitive reverse voltage power dissipation per igbt * maximum junction temperature short circuit ratings turn off safe operating area repetitive peak forward current power dissipation per diode * c features flow 90pack 0 target applications schematic types maximum ratings condition t j =t j max a i f v rrm a i frm v t j =t j max t p limited by t j max dc fo rward current * p tot gate-emitter peak voltage 45 20 30 with clips without clips 1 revi sion: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 t j =25c, unless otherwise specified parameter symbol value unit maximum ratings condition thermal properties insulation properties v is t=2s dc vol tage 4000 v min 12,7 mm min 10,93 mm cti >200 -40+(tjmax - 25) c storage temperature t stg -40+125 c com p arative tracking index insulation voltage creepage distance t op operation temperature under switching condition clear ance 2 revi sion: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 parameter symbo l unit v ge [v] or v gs [v] v r [v] or v ce [v] or v ds [v] i c [a] or i f [a] or i d [a] t j min typ max tj=25c 5 5,8 6,5 tj=150c tj=25c 1,5 1,93 2,3 tj=150c 2,23 tj=25c 0,01 tj=150c tj=25c 200 tj=150c tj=25c 86 tj=150c 85 tj=25c 34 tj=150c 35 tj=25c 202 tj=150c 272 tj=25c 70 tj=150c 124 tj=25c 1,18 tj=150c 1,76 tj=25c 0,81 tj=150c 1,39 thermal resistance chip to heatsink per chip r thjh phase-change material 1,38 k/w thermal resistance chip to heatsink per chip r thjh thermal grease thickness 50um = 1 w/mk 1,63 k/w tj=25c 1,2 1,86 2,3 tj=150c 1,78 tj=25c 10 tj=150c 13 tj=25c 297 tj=150c 508 tj=25c 1,46 tj=150c 2,94 di(rec)max tj=25c 58 /dt tj=150c 45 tj=25c 0,57 tj=150c 1,18 thermal resistance chip to heatsink per chip r thjh phase-change material 1,78 k/w the rmal resistance chip to heatsink per chip r thjh thermal grease thickness 50um = 1 w/mk 2,09 k/w g v incotech ntc reference b-value k b (25/100) tj=25c 3560 k tj=25c 3500 b-value b (25/50) tol. 3% 85 v tj=25c % 4700 5 -5 200 15 0 t r t d(off) v ce =v ge erec c oss c rss q rr t rr q gate i ges t f e on e off t d(on) i rrm v f v ge(th) v ce(sat) i ces r gint input capacitance output capacitance turn-off energy loss per pulse integrated gate resistor inverter transistor gate emitter threshold voltage value condi t ions characteristic values c mws a/ s f=1mhz rgon=32 0 20 15 rgo f f=32 15 15 15 15 t u rn-on energy loss per pulse reverse recovered charge inverter diode peak reverse recovery current reverse transfer capacitance diode forward voltage gate charge c ies reverse recovery time reverse recovered energy peak rate of fall of recovery current collector-emitter cut-off current incl. diode fall time turn-off delay time turn-on delay time rise time gate-emitter leakage current collector-emitter saturation voltage 1200 0 960 15 600 25 600 mw/k power dissipation p mw 2 rated resistance r power dissipation constant deviation of r25 ? r/r thermistor rgon=32 15 15 0,00 0 5 900 80 none tj=25c tj=25c tj=25c tj=25c v a nc na v ma mws ns pf ns 55 tj =25c 3 rev ision: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 figure 1 output inverter igbt figure 2 output inverter igbt typical output characteristics i c = f(v ce ) i c = f(v ce ) at at t p = 2 50 s t p = 2 50 s t j = 2 5 c t j = 150 c v g e from 7 v t o 17 v in steps of 1 v v ge from 7 v t o 17 v in steps of 1 v figure 3 output inverter igbt figure 4 output inverter fwd typical transfer characteristics typical diode forward current as i c = f(v ge ) a funct ion of forward voltage i f = f(v f ) at at t p = 2 50 s t p = 2 50 s v ce = 10 v out put inverter typical output characteristics 0 10 20 30 40 50 0 1 2 3 4 5 v ce (v) i c (a) 0 3 6 9 12 15 0 2 4 6 8 10 12 v ge (v) i c (a) t j = 25c t j = t jmax -25c 0 10 20 30 40 50 60 0 1 2 3 4 v f (v) i f (a) t j = 25c t j = t jmax -25c 0 10 20 30 40 50 0 1 2 3 4 5 v ce (v) i c (a) 4 rev ision: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 figure 5 output inverter igbt figure 6 output inverter igbt typical switching energy losses typical switching energy losses as a function of collector current as a function of gate resistor e = f(i c ) e = f (r g ) with an inductive load at with an inductive load at t j = 25/1 5 0 c t j = 25/15 0 c v ce = 600 v v ce = 6 00 v v ge = 15 v v ge = 15 v r go n = 32 i c = 15 a r g of f = 32 figure 7 output inverter fwd figure 8 output inverter fwd typical reverse recovery energy loss typical reverse recovery energy loss as a function of collector current as a function of gate resistor e rec = f(i c ) e rec = f(r g ) with an inductive load at with an inductive load at t j = 25/1 5 0 c t j = 25/15 0 c v ce = 600 v v ce = 6 00 v v ge = 15 v v ge = 15 v r go n = 32 i c = 15 a o ut put inverter e on high t e off high t e on low t e off low t 0 1 2 3 4 5 0 5 10 15 2 0 2 5 30 i c (a) e (mws) e off high t e on high t e on low t e off low t 0 1 2 3 4 5 0 25 50 75 100 125 150 r g ( w ) e (mws) e rec t j = t jmax -25c e rec t j = 25c 0,0 0,5 1,0 1 ,5 2,0 0 5 10 15 20 25 30 i c (a) e (mws) t j = t jmax -25c e rec t j = 25c e rec 0,0 0,3 0,6 0,9 1,2 1,5 0 25 50 75 100 125 150 r g ( w ) e (mws) 5 rev ision: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 figure 9 output inverter igbt figure 10 output inverter igbt typical switching times as a typical switching times as a function of collector current function of gate resistor t = f(i c ) t = f (r g ) with an inductive load at with an inductive load at t j = 150 c t j = 150 c v c e = 600 v v ce = 6 00 v v ge = 15 v v ge = 15 v r go n = 32 i c = 15 a r g of f = 32 figure 11 output inverter fwd figure 12 output inverter fwd typical reverse recovery time as a typical reverse recovery time as a function of collector current function of igbt turn on gate resistor t rr = f(i c ) t rr = f(r gon ) at at t j = 2 5/1 5 0 c t j = 25/15 0 c v ce = 600 v v r = 60 0 v v ge = 15 v i f = 15 a r gon = 32 v ge = 15 v ou tput inverter t doff t f t don t r 0,00 0,01 0, 10 1,00 0 5 10 15 20 25 30 i c (a) t ( m s) t j = t jmax -25c t rr t j = 25c t rr 0,0 0,2 0,4 0 ,6 0,8 0 25 50 75 100 125 150 r g on ( w ww w ) t rr ( m s) t doff t f t don t r 0,00 0,01 0, 10 1,00 0 25 50 75 100 125 150 r g ( w ww w ) t ( m s) t j = t jmax -25c t rr t rr t j = 25c 0,0 0,2 0,4 0 ,6 0,8 0 5 10 15 20 25 30 i c (a) t rr ( m s) 6 rev ision: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 figure 13 output inverter fwd figure 14 output inverter fwd typical reverse recovery charge as a typical reverse recovery charge as a function of collector current function of igbt turn on gate resistor q rr = f(i c ) q rr = f(r gon ) at at at t j = 25/1 5 0 c t j = 25/15 0 c v ce = 600 v v r = 60 0 v v ge = 15 v i f = 15 a r gon = 32 v ge = 15 v figur e 15 output inverter fwd figure 16 output inverter fwd typical reverse recovery current as a typical reverse recovery current as a function of collector current function of igbt turn on gate resistor i rrm = f(i c ) i rrm = f(r gon ) at at t j = 2 5/1 5 0 c t j = 25/15 0 c v ce = 600 v v r = 60 0 v v ge = 15 v i f = 15 a r gon = 32 v ge = 15 v ou tput inverter t j = t jmax - 25c i rrm t j = 25c i rrm 0 5 10 15 20 0 25 5 0 75 100 125 150 r gon ( w ww w ) i rrm (a) t j = t jmax -25c q rr t j = 25c q rr 0 1 2 3 4 0 25 50 7 5 1 00 125 150 r g on ( w ) q rr ( m c) t j = t jmax -25c i rrm t j = 25c i rrm 0 3 6 9 12 15 0 5 10 15 2 0 25 30 i c (a) i rrm (a) t j = t jmax -25c q rr t j = 25c q rr 0 1 2 3 4 0 5 10 15 2 0 2 5 30 i c (a) q rr ( m c) 7 rev ision: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 figure 17 output inverter fwd figure 18 output inverter fwd typical rate of fall of forward typical rate of fall of forward and reverse recovery current as a and reverse recovery current as a function of collector current function of igbt turn on gate resistor di 0 /dt,di rec /dt = f(i c ) di 0 /dt, di rec /dt = f(r gon ) at at t j = 2 5/1 5 0 c t j = 25/15 0 c v ce = 600 v v r = 60 0 v v ge = 15 v i f = 15 a r gon = 32 v ge = 15 v figur e 19 output inverter igbt figure 20 output inverter fwd igbt transient thermal impedance fwd tr ansient thermal impedance as a function of pulse width as a function of pulse width z thjh = f(t p ) z thjh = f(t p ) at at d = t p / t d = t p / t r thjh = 1,38 k /w r thjh = 1,63 k /w r thjh = 1,78 k /w r thjh = 2,09 k /w igbt thermal model values fwd thermal model values phase change interface phase change interface r (c/w) tau (s) r (c/w) tau (s) r (c/w) tau (s) r (c/w) tau (s) 0,14 7,1e-01 0,16 7,1e-01 0,07 2,6e+00 0,08 2,6e+00 0,55 1,0e-01 0,65 1,0e-01 0,12 3,9e-01 0,15 3,9e-01 0,40 3,6e-02 0,47 3,6e-02 0,72 6,9e-02 0,84 6,9e-02 0,19 7,0e-03 0,22 7,0e-03 0,45 1,7e-02 0,53 1,7e-02 0,10 9,2e-04 0,12 9,2e-04 0,24 3,8e-03 0,29 3,8e-03 0,18 6,4e-04 0,21 6,4e-04 thermal grease thermal grease output inverter t p (s) z thjh (k/w) 10 1 10 0 10 -1 10 -2 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 10 -5 d = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 t p (s) z th-jh (k/w) 10 1 10 0 10 -1 10 -2 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 10 -5 d = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 0 300 600 900 1200 1500 0 25 50 75 100 125 150 r gon ( w ww w ) di rec / dt (a/ m s) di 0 /dt di rec /dt 0 100 200 300 400 0 5 10 15 20 25 30 i c (a) di rec / dt (a/ m m m m s) di rec /dt di 0 /dt 8 rev ision: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 figure 21 output inverter igbt figure 22 output inverter igbt power dissipation as a collect or current as a function of heatsink temperature function of heatsink temperature p tot = f(t h ) i c = f(t h ) at at t j = 17 5 c t j = 175 c v g e = 15 v figure 23 output inverter fwd figure 24 output inverter fwd power dissipation as a forward current as a function of heatsink temperature function of heatsink temperature p tot = f(t h ) i f = f(t h ) at at t j = 17 5 c t j = 175 c o utput inverter 0 25 50 75 100 125 150 0 50 100 150 200 t h ( o c) p tot (w) 0 5 10 15 20 25 30 0 50 100 150 200 t h ( o c) i c (a) 0 25 50 75 100 0 50 100 150 200 t h ( o c) p tot (w) 0 5 10 15 20 25 30 35 0 50 100 150 200 t h ( o c) i f (a) 9 rev ision: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 figure 25 output inverter igbt figure 26 output inverter igbt safe operating area as a function gate v oltage vs gate charge of collector-emitter voltage i c = f(v ce ) v ge = f(q ge ) at at d = s ingle pulse i c = 15 a t h = 8 0 oc v ge = 15 v t j = t jmax oc figure 2 7 output inverter igbt figure 28 output inverter igbt short circuit withstand time as a function of typical short circuit collector current as a function of gate-emitter voltage gate-emitter voltage t sc = f(v ge ) v ge = f(q ge ) at at v ce = 1 200 v v c e 600 v t j 17 5 oc t j = 175 oc o utput inverter v ce (v) i c (a) 10 0 10 -1 10 1 10 2 10 1 10 2 100us 1ms 10ms 100ms dc 10 0 10 3 0 2,5 5 7,5 10 12,5 15 17,5 0 20 40 60 80 100 120 q g (nc) v ge (v) 240v 960v 0 3 6 9 12 15 18 12 14 16 18 20 v ge (v) t sc (s) 0 25 50 75 100 125 150 175 12 14 16 18 20 v ge (v) i c (sc) 10 re vision: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 figure 29 igbt reverse bias safe operating area i c = f(v ce ) at t j = t jm ax -25 oc u ccm i nus =u ccplus switching mode : 3 level switching figure 1 th erm i stor typical ntc characteristic as a function of temperature r t = f(t) thermistor ntc-typical temperature characteristic 0 1000 20 00 3000 4000 5000 25 50 75 100 125 t (c) r/ 0 5 10 15 20 25 30 35 0 200 400 600 800 1000 1200 1400 v ce (v) i c (a) i c max v ce max i c module i c chip 11 re vision: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 t j 150 c r gon 32 r goff 32 figure 1 o utput inverter igbt figure 2 output inverter igbt turn-off switching waveforms & definition of t doff , t eoff turn-on switching waveforms & definition of tdon, t eon (t eoff = integrating time for e off ) (t eon = integrating time for e on ) v ge (0%) = -15 v v g e (0%) = -15 v v ge (100%) = 15 v v ge ( 100%) = 15 v v c (1 00%) = 600 v v c ( 100%) = 600 v i c ( 100%) = 15 a i c (1 00%) = 15 a t dof f = 0,27 s t do n = 0,09 s t eo ff = 0,63 s t eo n = 0,36 s figur e 3 output inverter igbt figure 4 output inverter igbt turn-off switching waveforms & definition of t f turn-on switching waveforms & definition of t r v c (100%) = 600 v v c ( 100%) = 600 v i c ( 100%) = 15 a i c (1 00%) = 15 a t f = 0, 12 s t r = 0 ,04 s sw itching definitions output inverter general conditions = = = i c 1% v ce 90% v ge 90% -25 0 25 50 75 10 0 125 -0,2 0 0,2 0,4 0,6 0,8 time (us) % t doff t eoff v ce i c v ge i c10% v ge10% t don v ce 3% -50 0 50 100 15 0 200 2,9 3 3,1 3,2 3,3 3,4 3,5 time(us) % i c v ce t eon v ge fitted i c10% i c 90% i c 60% i c 40% -25 0 25 50 75 10 0 125 0 0,1 0,2 0,3 0,4 0,5 0,6 time (us) % v ce i c t f i c10% i c90% -50 0 50 100 15 0 200 3 3,1 3,2 3,3 3,4 3,5 time(us) % t r v ce i c 12 rev i sion: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 figure 5 output inverter igbt figure 6 output inverter igbt turn-off switching waveforms & definition of t eoff turn-on switching waveforms & definition of t eon p off (100%) = 8,98 k w p on (100%) = 8,98 k w e off (100%) = 1,39 m j e on (100%) = 1,76 m j t eoff = 0,63 s t eo n = 0,36 s figur e 7 output inverter igbt figure 8 output inverter fwd gate voltage vs gate charge (measured) turn-off switching waveforms & definition of t rr v geoff = -15 v v d ( 100%) = 600 v v ge on = 15 v i d (1 00%) = 15 a v c (1 00%) = 600 v i rr m (100%) = -13 a i c ( 100%) = 15 a t rr = 0 ,51 s q g = 1 17,4 6 nc switching definitions output inverter i c 1% v ge 90% -25 0 25 50 75 1 0 0 125 -0,2 0 0,2 0,4 0,6 0,8 time (us) % p off e off t eoff v ce 3% v ge 10% -50 0 50 100 15 0 200 2,8 3 3,2 3,4 3,6 time(us) % p on e on t eon -20 -15 -10 -5 0 5 10 15 20 -25 0 25 50 75 100 125 qg (nc) v ge (v) i rrm 10% i rrm 90% i rrm 100% t rr -150 -100 -5 0 0 50 100 150 3 3,2 3,4 3,6 3,8 4 time(us) % i d v d fitted 13 rev i sion: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 figure 9 output inverter fwd figure 10 output inverter fwd turn-on switching waveforms & definition of t qrr turn-on switching waveforms & definition of t erec (t qrr = integrating time for q rr ) (t erec = integrating time for e rec ) i d (100%) = 15 a p re c (100%) = 8,98 k w q rr (100%) = 2,94 c e re c (100%) = 1,18 m j t qrr = 1,00 s t er ec = 1,00 s sw itching definitions output inverter t qrr -100 -50 0 50 1 0 0 150 3 3,2 3,4 3,6 3,8 4 4,2 % i d q rr time(us) -25 0 25 50 75 100 125 3 3,2 3,4 3,6 3,8 4 4,2 time(us) % p rec e rec t erec 1 4 r e v i sion: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 version ordering code in datamatrix as in packaging barcode as without thermal paste ,housing without clips 10-rz126pa015sc-m628f41 m628f41 m628f41 without thermal paste ,housing with clips 10-R0126PA015SC-M628F40 m628f40 m628f40 without clips with clips outline pinout ordering code & marking ordering code and marking - outline - pinout 15 re vision: 2 copyright by vincotech
10-R0126PA015SC-M628F40 10-rz126pa015sc-m628f41 disclaimer life s upport policy as used herein: the information given in this datasheet describes the type of component and does not represent assured characteristics. for tested values please contact vincotech.vincotech reserves the right to make changes without further notice to any products herein to improve reliability, function or design. vincotech does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of vincotech. 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 16 rev ision: 2 copyright by vincotech

▲Up To Search▲

Price & Availability of 10-R0126PA015SC-M628F40

	To Download 10-R0126PA015SC-M628F40 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .